WEBSITE NOTICE
No part of this website may be reproduced without written permission. VF-Engineering is not responsible for errors, omissions or
consequential losses and damages. All supercharger products and accessory products portrayed are
the exclusive intellectual property of Zurich Engineering, Inc. and VF-Engineering. Third party registered trademarks, designs and
tradenames are the property of their associated registrants and no claim of association is made. The names
Audi, BMW, Bentley, Ford, Mazda, Mercedes, Porsche, Volkswagen and all their product names eg 911, 996, Golf, Quattro et al, are used for
descriptive purposes only. In no way does Zurich Engineering, Inc. or VF-Engineering imply or intend a direct connection between itself and any of the manufacturers named on this website.
Infringements of VF-Engineering product designs in part or whole will be litigated without notice under California Law.
STAGED POWER UPGRADE POLICY
When upgrading to the next stage of power for your supercharger kit, the supercharger pulley must be
replaced with a smaller pulley supplied in the upgrade kit. All supercharger pullies are security sealed
to the supercharger input shaft. By changing the pulley yourself your product warranty is limited to 1
year from date of purchase only. If you have chosen the 3 year warranty upgrade, you will need to send
your supercharger unit to Vortech Engineering with a Return Authorization (RA) number only for the
pulley change and security seal to be re-applied at the factory and for your 3 year warranty to remain
valid. Please advise your VF-Engineering product vendor who will provide you with an RA#. The customer
is responsible for shipping cost to Vortech Engineering. Vortech Engineering is not responsible for units returned
without an RA#.
GENERAL SHIPPING POLICY
Every attempt will be made to ship confirmed orders within three business days of receipt. All
products are FOB VF-Engineering, Anaheim, CA. Standard method of shipment is UPS Ground. Customers
are responsible for all freight charges on all merchandise returned because of a refused or missed
shipment. We cannot guarantee ship times and delivery timing is not of the essence.
BACK ORDERS
All back orders will be held and shipped when available unless otherwise specified. If VF-Engineering
experiences a long delay (30 days or more), customers will be notified prior to shipment.
CLAIMS
Inspect all merchandise immediately upon receipt. Carefully check to make sure that the part numbers,
style, size, etc., conforms with your original order. All goods are considered delivered to the purchaser
when placed in the hands of the Carrier and to the Purchaser. Any claim for loss or damage must be made
with the Carrier. Shortages: all claims for shipment shortages or errors must be made in writing within
20 business days of shipment by VF-Engineering. Claims should include a short description and supporting
documentation. Damaged Merchandise: all merchandise is inspected thoroughly before shipment. Should any
product arrive damaged, hold the original carton, all packing material and the damaged part and contact
the carrier to file a claim. Do not refuse shipment.
RETURNS
All returns must be authorized and accompanied by a Return Authorization (RA) number, freight prepaid.
No COD Freight Collect Returns will be accepted. All returned goods will be subject to a restocking fee up to 20%.
Discontinued, damaged, and special order items are not returnable. All returned products must be
in "like new" condition. Credit will be issued after inspection by VF-Engineering. Please make the
return within 15 days of receipt of a Return Authorization number and enclose a copy of the original
invoice and a brief explanation of the reason for return. A 20% restocking fee will be applied to all returns.
Call VF-Engineering at (714) 528-0066, asking for the Service Department to obtain your RA number
and have a copy of the original invoice on which the product was purchased from VF-Engineering.
REFUSED/MISSED SHIPMENTS
Refused or missed shipments returned to VF-Engineering do not constitute a right to a refund, credit,
or deduction from outstanding amounts due. The customer will be responsible for all freight charges
and a restocking fee of 20%. Any customer wanting the products reshipped must prepay the invoice plus
additional charges.
WARRANTY CLAIM PROCEDURE
If a VF-Engineering product is within the warranty period and you wish to make a claim, please follow the following procedure:
1. Call VF-Engineering at (714) 528-0066, asking for the Service Department and have the following information available:
- Serial number of the supercharger (if applicable);
- Copy of original invoice on which the product was purchased (must be dated and show retail store name);
- Year, make, model, vehicle mileage, and engine specifications of the vehicle;
- Number of miles on the VF-Engineering product;
- Perceived problem
- Service records should be available
2. VF-Engineering will then offer suggestions to help you in troubleshooting or will issue a return authorization (RA) number to return the product for warranty evaluation.
3. If You have been issued an RA number, you must "safety package" each product, which means you must place the product(s)
within a shipping box strong enough to hold the weight of the product(s) and to maintain its shape during shipping with adequate
packing material so that the product(s) will not hit other product(s), component(s), or the side of the box during shipping. You
may want to use a professional shipping company. Clearly mark the RA number in large (approximately 2") alphanumeric characters in
two locations on the outside of the box with a bold marker.
4. Include in the shipping box the following items:
- Serial number of the supercharger (if applicable);
- Copy of original invoice on which the product was purchased (must be dated and show retail store name);
- Year, make, model, vehicle mileage, and engine specifications of the vehicle;
- Number of miles on the VF-Engineering product;
- Perceived problem;
- A copy of the original Three Year Warranty Registration, if applicable;
- Return authorization number; and
- Name, Address, and phone number to which the product is to be shipped after inspection.
- Service records should be sent if asked.
5. Ship the properly safety packaged and marked box via United Parcel Service (800) 742-5877, www.ups.com, or other
carrier, prepaid and insured for the retail value of the product being returned to: VF-ENGINEERING, Service Department, 1365 NORTH DYNAMICS STREET, ANAHEIM, CA 92806
RA number _________________
If a VF-Engineering Limited Warranty applies, your product will be repaired or replaced at VF-Engineering's
option and returned to you, freight prepaid (excluding any international taxes, tariffs, customs
and/or duties, etc. which must be paid by you), via UPS ground service. If a VF-Engineering Limited
Warranty does not apply, we will advise you of the specific reason for denial and explain to
you the costs involved in repair or replacement of your product. After relaying this information
we will, at your option, either proceed with the repairs as quoted or return your product(s) to
you in the condition it/they are in at the time of inspection of the warranty evaluation by VF-Engineering.
If the warranty does not apply and you do not want VF-Engineering to repair or replace your product, you
will still be charged the disassembly and inspection charges for the product and the product will
be returned UPS COD insured for the new retail replacement value. This means you must pay any
disassembly and/or inspection charges, return shipping, and insurance charges to UPS before the
box will be delivered back to you.
EXPORT ORDERS
Orders will be accepted from customers outside the United States. Payments must be made in United
States currency or cashier's check drawn on a U.S. bank. Wire transfers will be accepted with prior
arrangements only. Payments must be made in full and in advance of shipment. Additional costs incurred
for special crating, shipping insurance, transport documents, customs, duties and taxes are to be paid
by the customer.
TAXES
California Sales Tax will be added to all California sales unless the customer furnishes
VF-Engineering with a valid Resale Permit number as issued by the California State Board of Equalization.
